• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life
• 2:1 improvement over points in current fall time for increased coil output
• Rotating cobalt magnets trigger a Hall Effect integrated circuit no points to burn, no moving parts to wear out
• Epoxy molding makes our module impervious to dirt, oil, grease and moisture
• Stable timing no need for any adjustments

Product Description
The Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition system. The Ignitor has been called the stealth ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no black-box to clutter the engine compartment. For optimal performance, use the Ignitor with Flame-Thrower 40,000 volt coils.

• Plug-’n-Play – installs in 20 minutes or less (no wire-cutting or special skills required)
• 100% Water-proof, 100% Dust-proof, 100% Shock-proof
• Included in kit: 2 slim digital ballasts, 2 bulbs, Relay harness, Installation instructions, Smart aluminum carry-case
• HID Xenon for both high and low beams
• Produces 2 to 3 times as much light as a halogen bulb

Product Description
HID lights have a glass chamber of gas that replaces the filament of traditional halogen light bulbs. The gas is ignited with an approximately 23,000 volt charge and stays illuminated by a constant 12v source that is provided by a ballast which is connected directly to your battery. Remarkably, HID lights are able to provide greater light output with much less power consumption. Studies show that a 35 watt HID lamp produces 3 times as much light compared to a 55 watt halogen bulb. Moreover, the 55 watt halogen bulb uses a continuous power draw of 10-15 amps, while the HID system uses 20 amps for starting up, but then drops down to a mere 3 amps during operation (that is up to 80% less power during use!). In addition to high output and low power usage, the HID headlight provides longer service life. With no filament  to vibrate and fatigue, under normal driving conditions, HID bulbs last roughly 10 times longer than halogen bulbs. What is the HID Color Temperature? Color Temperature is a measurement in Degrees Kelvin that indicates the hue of a light source, in this case the HID bulb. Color temperature is a characteristic of light that is sometimes misunderstood as brightness, when it’s more closely related to cool and warm color tones of light. While cool and warm are words used to describe a light’s temperature, this may be a bit misleading. The term color temperature actually refers to the color that is associated with the amount of heat needed to produce a color in from an ideal black body. Here is a rough guide to Color Temperatures for our HID bulbs. It is hard to describe HID colors accurately because different people tend to perceive colors slightly differently. 3000k= Yellow, 4300k= Bright White with a hint of yellow, 6000k= Pure white light (some people detect a slight blue), 8000k= White light with a blue tinge, 10000k= Light blue, 12000k= Deeper Blue, 30000k= Violet/Purple.

• Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium radiators meet or exceed the performance of the original equipment radiators they replace; that extends to all components, including engine and transmission
• Maximum cooling efficiency
• No modifications required for proper fit
• Engineered to last
• Perfect fit guarantee

Product Description
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium radiators meet or exceed the performance of the original equipment radiators they replace. That extends to all components, including engine and transmission. The complete radiator offers maximum cooling efficiency. No modifications required for proper fit. These units are engineered to last and a perfect fit guarantee.

• Low air flow restriction
• Pleated paper filter
• Prevents explosive atmosphere inside the engine crank
• Highly durable and reliable
• Easy installation and maintenance

Product Description
Wix Breather Filters remove chemical contaminants and particulate matter from the crankcase. They are made of pleated paper and connected to the breather tube. These filters also trap oil mist and keep it inside the engine for Reduces pollution.

• Engine Air Intake Hose

Product Description
OES Genuine Breather Hose; 2002 Volkswagen Passat, Eng:ATQ; 2003-2005 Volkswagen Passat, V6 2.8L

• Delivers required force for effective braking
• Facilitates easy engaging and disengaging of the brake shoes
• Manufactured under high quality standards
• Highly durable and reliable
• Features O.E. fit design

Product Description
Centric Parts C-Tek Standard Brake Master Cylinders are connected to the brake pedal which multiplies the applied force for effective braking. They include pistons and reservoir which changes the pressure and amount of brake fluid in the brake line required for braking. These cylinders transmit the applied force to the brakes for proper controlling of the vehicle.

• Completely new assembly
• Quality construction
• Finest materials

Product Description
Since 1914, Beck/Arnley has focused on the customer, offering high quality parts that look and perform the same as the original part. This ideal has never changed. Today, Beck/Arnley is committed to being the premium supplier of high quality import parts within the automotive market. BeckArnley is an original equipment brand that partners with other manufacturers to supply the parts that cars were originally built with. This product is in a BeckArnley package, note that the part may have been manufactured by an independent BeckArnley supplier and the number on the part may differ from the number on the package.

• Direct fit replacement unit
• Unit features Dorman engineered quality enhancements
• Backed by Dorman’s limited lifetime warranty

Product Description
Dorman is a leading supplier of dealer exclusive automotive replacement parts, automotive hardware and brake products to the automotive aftermarket. These products are often re-engineered with improvements for better reliability compared to the original part. Additional components needed for a complete repair are typically included as kits with Dorman parts. Dorman also helps reduce repair cost by providing the option to replace just the failed piece, not the assembly. Dorman takes pride in the quality of their products and in your satisfaction.

• Genuine Ford Motor Company Motorcraft part

Product Description
Motorcraft BT52 Auto Belt Tensioner

• Plug-’n-Play – installs in 20 minutes or less (no wire-cutting or special skills required)
• 100% Water-proof, 100% Dust-proof, 100% Shock-proof
• Included in kit: 2 slim digital ballasts, 2 bulbs, Installation instructions, Smart aluminum carry-case
• Single-Beam bulbs have no high-beam. If you want a high-beam you will need Kensun Bi-Xenon (dual beam) or Lo/Hi halogen Conversion Kits.
• Produces 2 to 3 times as much light as a halogen bulb

Product Description
HID lights have a glass chamber of gas that replaces the filament of traditional halogen light bulbs. The gas is ignited with an approximately 23,000 volt charge and stays illuminated by a constant 12v source that is provided by a ballast which is connected directly to your battery. Remarkably, HID lights are able to provide greater light output with much less power consumption. Studies show that a 35 watt HID lamp produces 3 times as much light compared to a 55 watt halogen bulb. Moreover, the 55 watt halogen bulb uses a continuous power draw of 10-15 amps, while the HID system uses 20 amps for starting up, but then drops down to a mere 3 amps during operation (that is up to 80% less power during use!). In addition to high output and low power usage, the HID headlight provides longer service life. With no filament  to vibrate and fatigue, under normal driving conditions, HID bulbs last roughly 10 times longer than halogen bulbs. What is the HID Color Temperature? Color Temperature is a measurement in Degrees Kelvin that indicates the hue of a light source, in this case the HID bulb. Color temperature is a characteristic of light that is sometimes misunderstood as brightness, when it’s more closely related to cool and warm color tones of light. While cool and warm are words used to describe a light’s temperature, this may be a bit misleading. The term color temperature actually refers to the color that is associated with the amount of heat needed to produce a color in from an ideal black body. Here is a rough guide to Color Temperatures for our HID bulbs. It is hard to describe HID colors accurately because different people tend to perceive colors slightly differently. 3000k= Yellow, 4300k= Bright White with a hint of yellow, 6000k= Pure white light (some people detect a slight blue), 8000k= White light with a blue tinge, 10000k= Light blue, 12000k= Deeper Blue, 30000k= Violet/Purple.

• Two Year Hassle Free Warrany!
• Expidited Shipping Available!
• Ships Within One Business Day!

Product Description

OEMs: Delco Mercury Marine

Starter Family: Delco PG260G

Type: PMGR

Voltage: 12

kW: 1.7

Rotation: CW

Teeth/Splines: 11

Pinion/Splines OD: 29.5mm / 1.161in

DE Housing Number: 371 12182

Mounting Hole 1: 10.0mm ID Unthreaded

Mounting Hole 2: 10.0mm ID Unthreaded

New or Remanufactured: New

Approximate Weight: 9.435 lbs / 4.29 kg

Delco 8000282 9000819 9000821 9000840 9000884

Leece Neville 35261180S

Lester 6560 6562 6791 6792

Mando M59601

Mercury Marine 50 608964A2 50 608964A3 50 806963A2 50 807904A1 50 807907 50 808011A1 50 863007A1

OMC Outboard Marine 3854751 3855177

PIC Picture ID 140 576 140 577 140 579

Valeo TM000A24301

Volvo 3850764-4 3854751-9 3856004-1 3860566 3860764-4

MERCRUISER Marine

SKI ENGINE

Black Scorpion Ski Gen+

Model 350 Mag MPI Ski Gen+

Model 5.7L Ski CARB

Model MX 6.2L BS MPI Ski

STERN DRIVE

3.0 / 3.0LX

350 Mag MPI Alpha & Bravo 00

350 Mag MPI Hor Alpha & Bravo

4.3L Carb. Alpha & Bravo

4.3L Gen+ 4.3L

4.3L MFI Alpha & Bravo

4.3L EFI Gen+ TBI 98-01

4.3L MPI 01-02

4.3LH Gen+ 4 BBL

454 Mag Bravo MPI Gen VI

496 Mag

496 Mag HO

5.0L 2 BBL Gen+ 98-02

5.0L Carb. Alpha & Bravo

5.0L EFI Gen+ 98-01

5.0L MPI Alpha & Bravo

5.7L 2 BBL Gen+ 98-02

5.7L Carb. Alpha & Bravo

5.7L EFI Gen+ 98-01

502 Mag MPI Gen VI

MX 6.2L MPI

MX 6.2L MPI Horizon

VOLVO PENTA Marine

INBOARD & STERNDRIVE

3.0GLM 00-07

3.0GLP 00-07

3.0GS 93-99

3.0GSM 00-02

4.3GL 00-07

4.3GXi Osi 00-07

5.0GL 00-07

5.0Gxi Osi 01-07

5.7GL 00 07

5.7GXi 00-07

5.7Gi 00-07

5.7OSi 00-07

5.7OXi 00-07

7.4Gi 94-99

7.4Gsi 94-99

8.1GSi 00-02

8.1GXi 00-07

8.1Gi 00-07

8.1OSI 01-07

8.2GSi 94-99

DPX375 00-02

DPX385 96-00

DPX4 00-02

DPX500 99-02

DPX525 99-02

DPX600 99-02

IPS500G 07

Product Description
Beck/Arnley 077-1473S Fr Left Brake Caliper W Hardware

• Top Width – 25 (mm)
• Effective Length- 1096 (mm)
• Number of Teeth- 137
• Tooth Pitch- 8.000
• Timing Marks – No

Product Description
Construction Type – Hi Temperature , Tooth Profile – Round Tooth, With Flat Tip

Product Description
CENTRIC BRAKE HOSE — Manufactured To The Highest Quality Standards To Meet Or Exceed OEM Specifications For Long Lasting Service And Designed To Be A Direct Replacement Of The Original Hose For Easy No Hassle Replacement

Location: Front

• Precision fabrication assures perfect fit
• Holds super grease for quiet operation
• Premium grade polyurethane components
• Provides necessary rigidity

Product Description
Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components.

• This item is sold as (1) unit 1 (2- Required)
• Extended length 11.33″ (measured center to center of ball studs or eyelet ends)
• Compressed length 7.37″ (measured center to center of ball studs or eyelet ends)
• Easy to install, most vehicles using a small flat headed screw driver.

• Plug-’n-Play – installs in 20 minutes or less (no wire-cutting or special skills required)
• 100% Water-proof, 100% Dust-proof, 100% Shock-proof
• Included in kit: 2 premium ballasts, 2 bulbs, Installation instructions, Smart aluminum carry-case
• Standard kits have a 2-year warranty
• Produces 2 to 3 times as much light as a halogen bulb

Product Description
HID lights have a glass chamber of gas that replaces the filament of traditional halogen light bulbs. The gas is ignited with an approximately 23,000 volt charge and stays illuminated by a constant 12v source that is provided by a ballast which is connected directly to your battery. Remarkably, HID lights are able to provide greater light output with much less power consumption. Studies show that a 35 watt HID lamp produces 3 times as much light compared to a 55 watt halogen bulb. Moreover, the 55 watt halogen bulb uses a continuous power draw of 10-15 amps, while the HID system uses 20 amps for starting up, but then drops down to a mere 3 amps during operation (that is up to 80% less power during use!). In addition to high output and low power usage, the HID headlight provides longer service life. With no filament  to vibrate and fatigue, under normal driving conditions, HID bulbs last roughly 10 times longer than halogen bulbs. What is the HID Color Temperature? Color Temperature is a measurement in Degrees Kelvin that indicates the hue of a light source, in this case the HID bulb. Color temperature is a characteristic of light that is sometimes misunderstood as brightness, when it’s more closely related to cool and warm color tones of light. While cool and warm are words used to describe a light’s temperature, this may be a bit misleading. The term color temperature actually refers to the color that is associated with the amount of heat needed to produce a color in from an ideal black body. Here is a rough guide to Color Temperatures for our HID bulbs. It is hard to describe HID colors accurately because different people tend to perceive colors slightly differently. 3000k= Yellow, 4300k= Bright White with a hint of yellow, 6000k= Pure white light (some people detect a slight blue), 8000k= White light with a blue tinge, 10000k= Light blue, 12000k= Deeper Blue, 30000k= Violet/Purple.

• Plug-’n-Play – installs in 20 minutes or less (no wire-cutting or special skills required)
• 100% Water-proof, 100% Dust-proof, 100% Shock-proof
• Produces 2 to 3 times as much light as a halogen bulb
• HID Xenon for both high and low beams
• Relay harness included

Product Description
HID lights have a glass chamber of gas that replaces the filament of traditional halogen light bulbs. The gas is ignited with an approximately 23,000 volt charge and stays illuminated by a constant 12v source that is provided by a ballast which is connected directly to your battery. Remarkably, HID lights are able to provide greater light output with much less power consumption. Studies show that a 35 watt HID lamp produces 3 times as much light compared to a 55 watt halogen bulb. Moreover, the 55 watt halogen bulb uses a continuous power draw of 10-15 amps, while the HID system uses 20 amps for starting up, but then drops down to a mere 3 amps during operation (that is up to 80% less power during use!). In addition to high output and low power usage, the HID headlight provides longer service life. With no filament  to vibrate and fatigue, under normal driving conditions, HID bulbs last roughly 10 times longer than halogen bulbs. What is the HID Color Temperature? Color Temperature is a measurement in Degrees Kelvin that indicates the hue of a light source, in this case the HID bulb. Color temperature is a characteristic of light that is sometimes misunderstood as brightness, when it’s more closely related to cool and warm color tones of light. While cool and warm are words used to describe a light’s temperature, this may be a bit misleading. The term color temperature actually refers to the color that is associated with the amount of heat needed to produce a color in from an ideal black body. Here is a rough guide to Color Temperatures for our HID bulbs. It is hard to describe HID colors accurately because different people tend to perceive colors slightly differently. 3000k= Yellow, 4300k= Bright White with a hint of yellow, 6000k= Pure white light (some people detect a slight blue), 8000k= White light with a blue tinge, 10000k= Light blue, 12000k= Deeper Blue, 30000k= Violet/Purple.

• DESCRIPTION: 92-95 96-00 civic godspeed radiator + 12″ s- type electric fan (1250cfm) (manual only)
• core size- 349 X 349 X 53mm (core size) INLET / OUTLET: 1 .3″ -100% light weight aluminum -direct bolt-on
• -perfect for street or strip -40% more cooling efficient then stock -3 YEARS WARRANTY, BETTER THEN KOYO

Product Description
DESCRIPTION: 92-95 96-00 civic godspeed radiator + 12″ s- type electric fan (1250cfm) (manual only)

RADIATOR SPEC:

core size- 349 X 349 X 53mm (core size)
INLET / OUTLET: 1 .3″
-100% light weight aluminum
-direct bolt-on
-perfect for street or strip
-40% more cooling efficient then stock
-3 YEARS WARRANTY, BETTER THEN KOYO
Complementing the line of high-performance upgrades and intercooler kits, GODSPEED Radiator were designed to provide maximum cooling efficiency to prevent premature engine failure. GODSPEED Radiators are full light-weight, high-heat transferring aluminum featuring a tube & fin design that dramatically increases surface area that enables the heat to dissipate more efficiently, the GODSPEED Radiator is 40% more efficient than stock. Complete with polished upper/lower end tanks and Temperature-Sensor Port, the GODSPEED Radiator aesthetically appeasing and a direct bolt-on application.

• Designed to improve braking performance
• Made from premium quality material
• Resists abrasion and organic solvents
• Features 100% non-asbestos formulations
• Ensures better braking performance with minimal noise and heat generation

Product Description
Raybestos 780PG Brake Shoe Set

• Ships Within 24 Hours Monday-Friday
• One Year Warranty
• 100% Brand New, High Quality, Direct OE Replacement
• Plastic/Metal
• BMA700057A

Product Description

This is a brand new TYC Blower Motor Assembly for
Toyota